CREALITY Spider Speedy Ceramic Hotend Kit Rapid Heating High Flow Printing for most Ender/CR Series
SPECIFICATIONSOrigin: Mainland ChinaModel Number: Spider Speedy Ceramic HotendItem Type: HotendBrand Name: CREALITY 3D Product Description Name:Spider Speedy Ceramic HotendNozzle:Hardened steel nozzle 0.4mm*1,Copper alloy nozzle 0.8mm*1Product Size:51x22x18mmWeight:40gColor:Red and blackCompatiblewith Filament:PLA, ABS,PETG,TPU, PPPC,Nylon,PEEK, PEl, etcSupport Filament Diameter:01.75+0.05mmRetraction Distance:Max 5mm(can be adjusted accordingto the printing situation)Maximum Flow Rate:32mm3/s. Compatible Models Ender-3 Pro/Ender-3/Ender-3 V2/Ender-5/Ender-5 Pro/Ender-5 PlusEnder-3s/Ender-6/Ender-4/Ender-3 Max/Ender-2 Pro/Ender-2CR-10S CR-10/CR-10 S5/CR-10 S4/CR-10Mini/CR-20/CR-20 Pro High Thermal ConductivityUniform HeatingThe cylindrical ceramic heating ring improves heatingefficiency and reduces heat loss. Uniform heating and fastheat transfer, it only takes 40 seconds to heat from roomtemperature to 200°C. Available up to 300°C hightemperature printingLarge Hot Melt Section andHigh Flow Support 400mm/sHigh-speed PrintingThe overall hot melt section is increased by 30% (The hotmelt section length is 27.8mm), and the high-temperatureheat-resistant insulation sheet is added to maintain thetemperature of the melting section, supporting 400mm/shigh-speed printing.The titanium alloy base is used to reduce the thermalconductivity by 30%, which can reduce the transfer of heatfrom the heating section to the heat dissipation sectionand ensure the smooth feedingBi-metal Heat BreakHigh TemperatureResistance Up to 300·CThe heat break is made of titanium and copper alloyswhich supports high temperature printing at 300°C and iscompatible with more filaments. Also, the 0.2mm thinwall thickness for excellent thermalinsulation(Compatible filaments: PLA, ABS, PETG, TPU, PP, PC, Nylon,PEEK, PEl, etc.)Strength UpgradeLonger lifespanThe heat break and heat sink are perfectly fit through thetitanium alloy base to avoid pressure between them, andthe strength is upgraded to extend the life of the hotendStructural UpgradeFaster Heat DissipationThe heat sink size is 30% larger than the general hotendimproving heat dissipation efficiency and ensuringsmooth feedingMaterial Upgrade forBetter PrintingThe nozzle is made of high-quality hardened steel, androughness of Ra0.25 on the inner wall of the nozzle andheat break to improve print quality.Lightweight DesignEasy to InstallModular standard interface design, ready to use withoutprinting the fan shroud.Lightweight design, easy installation and maintenance,compatible with most printers on the marketSmall form factor 51x22x18mmWeights only 40gWide CompatibilityCompatible with Creality Ender-3/ Ender-5 series/ CR-10/CR-10S Ender-2 printer