Raspberry Pi USB to Ethernet RJ45 Network Port USB Hub Splitter 3 USB Ports 5V Hat for Raspberry Pi 4 Model B/3B+/3B/Zero W
SPECIFICATIONSOrigin: Mainland ChinaCompatible With: Raspberry Pi 4B/3B/3B/ZeroBrand Name: SHCHVAccessory Type: Extension BoardOption 1:Raspberry Pi USB to Ethernet RJ45 Network Port USB Hub Splitter 3 USB Ports 5V Hat for Raspberry Pi 4 Model B/3B+/3B/Zero W Introduction : This Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH. Features : 1. 3x USB ports, compatible with USB2.0/1.12. 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip3. Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port Interfaces : 1. Raspberry Pi GPIO interface: for connecting Raspberry Pi2. USB extended ports: USB1~USB33. RJ45 port: 10/100M Ethernet interface4. USB HUB interface (bottom): for connecting the HUB to the Raspberry Pi USB portRaspberry Pi Zero / Zero W / Zero WH: connected via Micro USB connectorRaspberry Pi B+ / 2B / 3B / 3B+ /4B: connected via Micro USB cable5. TS8121A: Ethernet wave filter6. RTL8152B: 10/100M Ethernet chip7. FE1.1S: USB HUB chip8. LED indicators:PWR: power indicatorACT: Ethernet indicatorD1~D3: dedicated indicator for USB1~USB3 respectively Specifications : Operating voltage: 5VDimension: 65mm × 30mmMounting hole size: 3.0mm How to use : Please refer to :www.waveshare.com/wiki/ETH/USB_HUB_HAT Packing List : 1 x Ethernet USB HUB HAT1 x Micro USB connector1 x Micro USB cable 1 x Screws pack (not include Raspberry Pi) Option 2:PoE Ethernet / USB HUB HAT For Raspberry Pi Zero, 3x USB 2.0 Ports, 802.3af-Compliant PoE Ethernet / USB HUB HAT Suitable For Raspberry Pi Zero / Zero W / Zero WH, 802.3af-Compliant Features At A Glance The PoE/ETH/USB HUB HAT is a PoE (Power over Ethernet) USB HUB HAT designed for Raspberry Pi Zero. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports. Designed for Raspberry Pi Zero, compatible with Zero series boards Incorporates RTL8152B Ethernet chip, with 10M / 100M auto-negotiation RJ45 port PoE (Power over Ethernet) feature, 802.3af-compliant Fully isolated SMPS (Switch Mode Power Supply) 3x extended USB ports, compatible with USB 2.0 / 1.1 Specifications POE POWER INPUT 37V ~ 57V DC in POWER OUTPUT 5V 2.5A DC out NETWORK STANDARD IEEE 802.3af-compliant PoE DIMENSIONS 23.10 × 65.00 mm Compatible With Raspberry Pi Zero Series Designed For Raspberry Pi Zero, Compatible With Zero / Zero W / Zero WH 3x Extended USB 2.0 Ports USB1 ~ USB3, Compatible With USB 2.0 / 1.1 Extended Ethernet Port USB To Ethernet Conversion By The RTL8152B Chip, 10M / 100M Auto-Negotiation Application Example For reference ONLY, the Raspberry Pi Zero, LCD display, and MicroSD card are NOT included. Outline Dimensions Resources & Services Wiki: PoE/ETH/USB_HUB_HAT Packing List: Weight: 0.063 kg PoE/ETH/USB HUB HAT x1 USB HUB Board x1 Screws pack x1 Screwdriver x1