Kenwood Class D Mono Amplifier, 2000 Watts Max

    Specifications:   Class D Mono Amp  2000 Watts Max power 4 ohms 500W x 1 RMS 2 ohms 1000W x 1 RMS Signal to Noise Ratio: 100 dB1 Low Pass Filter: 50 - 200 Hz (-24 dB / oct.)1 Infrasonic Filter: 20 - 50 Hz (-24 dB / oct.)1 Bass Boost: 40 Hz (0 - +18 dB)1 Size(inch): (W)13-3/16" x (H)2-3/16" x (D)7-9/16"1 Weight(lbs): 6.2 Speaker level input Bass boost SPECS   Title Class D Mono Power Amplifier Amplifier Type Class D CEA-2006 Primary Ratings Power Output 500Watts RMS x 1 at 4 Ohms and ≤1%THD+N Signal-to-Noise Ratio 76dBA (Reference: 1Watt into 4Ohms) Maximum Power Output MAX POWER 2000W Power Output Rated Power at 14.4V 500Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤1.0% THD)1000Watts RMS x [ch] (2 Ohms, 100Hz, ≤1.0% THD) Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V) Frequency Response 20Hz-200Hz (+0dB, -3dB)Class D Input Impedance 10k ohm Speaker Impedance 4Ω (2Ω to 8Ω allowable) Audio Section Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct) Infrasonic Filter Built in Variable Infrasonic Filter (20Hz-50Hz, -24dB/oct) Bass Boost Built in Bass Boost Control (40Hz, 0dB-+18dB) RCA Input Sensitivity 0.2[V] - 5.0 [V] Speaker Level Input Sensitivity 4.0[V] - 12.0 [V] Terminals Battery & Ground Screw Type Terminal Block (Ni) (M6) Speaker Output Screw Type Terminal Block (Ni) (M4) Line In RCA (Ni) Line Out RCA (Ni) Speaker Input JST Connector General Dimensions(WxHxD) 335 [mm] x 56 [mm] x 192 [mm]13-3/16 inch x 2-3/16 inch x 7-9/16 inch Weight (kg) 2.8 [kg] 6.2 [lbs] Operating Voltage 14.4V（11-16V allowable） [V] Current Consumption 65 [A] Key Features CEA-2006 CompliantClass D2 Ohms Load CapabilitySpeaker Level InputSignal Sensing Turn-onTerminal CoverPower MOS-FET Switching Power SupplyCast Aluminum Heat Sink DesignLine Output Terminals for Extension Others Triangle Indicator