Phrozen Water-Washable 3D Printing Resin

Phrozen Water-Washable 3D Printing Resin       Getting Started With Water-Washable Resin 101 Cleaning 1. Remove models from the building plate. 2. Wash models in a Washing Station filled with water or 95% ethanol for 45–60 seconds. When washing with water, we recommend a final quick rinse with ethanol for cleaner results.3. After cleaning, leave it to air dry for at least 30 minutes or use a compressed air gun. *When printing flat on the building plate, remove the printed objects carefully to avoid deformation on the objects.*If models are hollowed, make sure the inner parts are thoroughly cleaned.*Do not soak models in solvent for more than 60 seconds to avoid surface damage.   Post-Curing Post-cure the models in post-curing stations like Phrozen Cure or Phrozen Cure Mega S to post-cure the models for 30 minutes for the best results.   Check Out These Amazing Models