Flexion Retrofit Kit for Common Dual Extruder

Key Features: Flexible filament extruder retrofit kit for both left and right sides of a dual-extruder printer Print fast with flexible materials, higher resolution, and fewer failures Uses a high-stiffness lever to compress the filament for more tension and more precise control of the tension Kit requires extruder disassembly to install upgrade 3D printer extruder retrofit kit for dual-extruder direct-drive machines, such as the Flashforge Creator Pro, QiDi Tech, Powerspec Ultra, and CTC Dual Extruder. The Flexion extruder will allow full-speed printing of flexible filaments and improved accuracy printing with PLA and ABS. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control of feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works well with flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA. Item SpecificsWeight : 0.1 lbsSize: 3.5" × 4.5" × 1.25"Works with: Flashforge Creator Pro, Powerspec Ultra, QiDi Tech, Malyan M180, Wanhao Duplicator 4s, CTCDetailed instructions on disassembly and installation can be found on the Diabase Engineering site. IncludesMounting block2 - Tensioning arm with idler and cleaning brush (one right & one left)2 - Adjustment cam2 - Drive gear2 - Feed barrel2 - Heater block2 - Insulation for heater block6 nozzles – 2 each 0.3, 0.4, 0.5 mm orifice2 - Adapter shim to allow 6mm and 0.25″ heater cartridges4 - PTFE feed tubes2 - spare cleaning brushesAll mounting hardware6mm and 7mm wrench for installing nozzlesStepper motor or motor mounting screws not included