Adafruit 16mm Illuminated Pushbutton - Yellow Momentary

Key Features Yellow LED backlit Button Can be controlled separately from the switch action - either to indicate or just to look good Black plastic housing 18mm x 29.4mm x 18.06mm A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 3V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.This particular button has a white body and LED and is momentary, normally open. The two switch contacts are not connected normally. When you push the button they