
Crypto Mining Motherboard Test Bench + GPU Stand / PC and Test Rig + Screws
UPDATED 4/2025: Black PETG (was PLA) and with M3 Inserts! Features and further details Details: This is a custom made motherboard stand at 60° angle. Its made for CPU Mining or a desktop pc rig. Its two pieces total (for the base model). Easy to setup and move around while keeping the motherboard components off of your desk or table. Supports ATX and Micro ATX motherboard sizes. ***DOES NOT support Mini ITX as the PSU won't fit behind the motherboard. Motherboard Stand: Put the motherboard on the its side and use 4x M3 screws on the bottom halve of your motherboard to the four standoffs. NOTE- The motherboard will be upside down.. After the motherboard legs are attached, place it up right (upside down for the motherboard). Next the left side has a dual SSD and HDD mount. Please note you need to mount the SSD first before the 3.5 in HDD. Next the right side has a PSU mount, be sure to use all 4x 6/32 screws to secure the PSU tightly against the mount. Then route your cables to the motherboard and drives. GPU Stand Mount: Clean Black Plastic design has a minimalistic. Designed to have a perfectly fit around all GPUs. Whether single, dual, or triple slot cards, this stand should be able to support the weight. The stands can be connected together on the sides with a locking mechanism. If you need to buy more GPU Stands- https://www.ebay.com/itm/195996554998 Package Includes: The two motherboard legs and GPU stand plus the 2 types of screws. If you have any questions be sure to ask. *MOTHERBOARD & GPU NOT INCLUDED Designed by: 3D Print Master LLC Manufactured by: 3D Print Master LLC