PRV Audio 6MR200A-4 6.5" Midrange Loudspeaker
Features The 6MR200A-4 midrange speaker is our solution for PROAudioOnWheels for Car audio systems. This unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24? mounting depth. To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression. Impressive choice for high output home, car, and professional audio systems Smooth response through the mid-bass and vocal range Rigid yet lightweight stamped steel frame Use this midrange in professional 3-way sound system, as a high output car audio door speaker, or as a midrange in a bass guitar speaker. With a naturally damped paper cone and cloth accordion surround resonances are kept under control making for an easy transition to a high frequency driver. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 94 dB Voice Coil Diameter: 1.5? GENERAL SPECIFICATIONS Nominal Diameter 6? (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.00V at 1m 94 dB Recommended Hi Pass Crossover**For Full Power Handling 150 Hz****12db Per Octave Crossover Frequency Response at -10dB 155 11,000 Hz Voice Coil Diameter 1.5? (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 8.0 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Stamped Steel THIELE-SMALL PARAMETERS Equivalent Volume Vas 3.16 l Excursion (mathematical)*** Xmax 2.62 mm Free Air Resonance Fs 114.1 Hz Mechanical Factor Qms 13.16 Electrical Factor Qes 1.28 Total Factor Qts 1.17 Cone Area Sd 137 cm Mechanical Mass Mms 10.1 g Bl Factor Bl 6.27 Tm Dc Resistance Re 3.4 Ohms Inductance Le 0.26 mH at 1 kHz Mechanical Mass Without Air Mmd 9.02 g Mechanical Compliance Cms 0.120 mm/N ***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4